Discover

Classify EU Battery Types

● Live

halowerk.com

Copies a prompt for your agent.

Applies the definitions of Art. 3(1) points 9-15 Regulation (EU) 2023/1542 (portable: sealed, at most 5 kg, not designed for industrial use; general use formats; LMT: sealed, at most 25 kg, traction of light means of transport incl. type-approved L vehicles; SLI; EV: traction of L vehicles above 25 kg or of M, N, O vehicles; industrial: designed for industrial use or above 5 kg and none of the others; stationary battery energy storage system) and the exclusions of Art. 1(5).

Price
$0.002
Asked in its payment challenge
Chain
Base
Paid in
USDC
Live
4 of 4 checks

Endpoints

POSThttps://rechen.halowerk.com/v1/battery-category

$0.002 asked in its payment challenge on 17 Nov 2026

curl -i -X POST 'https://rechen.halowerk.com/v1/battery-category' \
  -H 'Content-Type: application/json' \
  -d '{"format":"AA","sealed":true,"weight_kg":0.023,"designed_for":"general","rechargeable":false}'
30 more endpoints · on x402 Bazaar

Checks and payment terms on this page refer to the first endpoint's example. Other endpoints have not been checked individually.

Base URLhttps://rechen.halowerk.com/v1

  • POST/engineering-bolt-circle-layout$0.005Return equally spaced bolt-center coordinates and adjacent-hole spacing on a supplied pitch circle.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-bolt-circle-layout' \
      -H 'Content-Type: application/json' \
      -d '{"holes":4,"center":[0,0],"radius_mm":50,"start_degrees":0,"omitted_indices":[]}'
  • POST/engineering-calibration-inverse-branches$0.005Return every inverse piecewise-linear calibration branch and flat response interval for supplied target readings.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-calibration-inverse-branches' \
      -H 'Content-Type: application/json' \
      -d '{"curve":[[0,0],[10,100],[20,0]],"targets":[50,100,150]}'
  • POST/engineering-cutting-stock-kerf-plan$0.005Return a deterministic first-fit-decreasing bar-cut plan with explicit per-piece kerf consumption.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-cutting-stock-kerf-plan' \
      -H 'Content-Type: application/json' \
      -d '{"kerf_mm":3,"pieces_mm":[600,390,390,200],"stock_length_mm":1000}'
  • POST/engineering-dimension-expression-check$0.005Return the SI dimension vector of a declared unit-factor product and compare it with an expected dimension.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-dimension-expression-check' \
      -H 'Content-Type: application/json' \
      -d '{"factors":[{"unit":"N","power":1},{"unit":"m","power":-2}],"expected":[-1,1,-2,0,0,0,0]}'
  • POST/engineering-gear-train-direction$0.005Return exact signed speed ratio and rotation parity for a supplied compound gear-mesh sequence.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-gear-train-direction' \
      -H 'Content-Type: application/json' \
      -d '{"meshes":[{"kind":"external","driven_teeth":40,"driver_teeth":20},{"kind":"external","driven_teeth":30,"driver_teeth":10}],"input_rpm":1200}'
  • POST/engineering-hole-shaft-fit-envelope$0.005Return clearance extremes and clearance, interference or transition classification from supplied diameter limits.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-hole-shaft-fit-envelope' \
      -H 'Content-Type: application/json' \
      -d '{"hole_mm":[10,10.02],"shaft_mm":[9.99,10.01]}'
  • POST/engineering-mixture-mass-balance$0.005Return mixture substance fraction and the required addition mass to reach a supplied target fraction.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-mixture-mass-balance' \
      -H 'Content-Type: application/json' \
      -d '{"components":[{"mass_kg":10,"fraction":0.2},{"mass_kg":10,"fraction":0}],"target_fraction":0.05,"addition_fraction":0}'
  • POST/engineering-parallel-resistor-envelope$0.005Return nominal and worst-case equivalent resistance and supply power for a supplied parallel resistor bank.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-parallel-resistor-envelope' \
      -H 'Content-Type: application/json' \
      -d '{"resistors":[{"ohms":100,"tolerance_fraction":0.1},{"ohms":100,"tolerance_fraction":0.1}],"voltage_v":10}'
  • POST/engineering-thermal-clearance-envelope$0.005Return thermal clearance and its zero crossing.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-thermal-clearance-envelope' \
      -H 'Content-Type: application/json' \
      -d '{"hole_mm":10.02,"shaft_mm":10,"reference_c":20,"temperatures_c":[20,120,220],"hole_alpha_per_k":0.00001,"shaft_alpha_per_k":0.00002}'
  • POST/engineering-tolerance-stack-envelope$0.005Return worst-case stack limits and an explicitly assumed RSS half-range from supplied component tolerances.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/engineering-tolerance-stack-envelope' \
      -H 'Content-Type: application/json' \
      -d '{"parts":[{"lower":-0.1,"upper":0.2,"nominal":10,"coefficient":1},{"lower":-0.05,"upper":0.05,"nominal":5,"coefficient":-1}]}'
  • POST/machine-bearing-load-life$0.005Return equivalent dynamic load and basic L10 life for a supplied revolution-weighted load spectrum.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-bearing-load-life' \
      -H 'Content-Type: application/json' \
      -d '{"rpm":1000,"blocks":[{"load_n":100,"revolutions":1000000}],"bearing":"ball","capacity_n":1000}'
  • POST/machine-capstan-tension-train$0.005Return impending-slip tension limits across supplied successive friction wraps.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-capstan-tension-train' \
      -H 'Content-Type: application/json' \
      -d '{"wraps":[{"angle_rad":1,"friction_mu":0.6931471805599453}],"slack_tension_n":100}'
  • POST/machine-chain-polygonal-ripple$0.005Return ideal chain speed extrema and chordal ripple from sprocket pitch and tooth count.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-chain-polygonal-ripple' \
      -H 'Content-Type: application/json' \
      -d '{"teeth":4,"pitch_m":0.01,"shaft_rpm":60}'
  • POST/machine-clutch-annular-torque$0.005Return ideal annular-clutch torque and slip power under uniform pressure or uniform wear.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-clutch-annular-torque' \
      -H 'Content-Type: application/json' \
      -d '{"model":"uniform_wear","contacts":1,"friction_mu":0.5,"inner_radius_m":0.05,"normal_force_n":100,"outer_radius_m":0.1,"relative_slip_rpm":60}'
  • POST/machine-differential-screw-travel$0.005Return relative travel of two coaxial signed lead-screw advances.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-differential-screw-travel' \
      -H 'Content-Type: application/json' \
      -d '{"hand1":"right","hand2":"right","turns":10,"pitch1_mm":1,"pitch2_mm":0.8}'
  • POST/machine-flywheel-speed-energy$0.005Return ideal flywheel inertia required by a cyclic energy swing and allowed speed fluctuation.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-flywheel-speed-energy' \
      -H 'Content-Type: application/json' \
      -d '{"mean_rpm":60,"energy_swing_j":100,"fluctuation_fraction":0.1}'
  • POST/machine-gear-hunting-repeat$0.005Return tooth-contact repeat counts and hunting-tooth coverage for a declared gear pair.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-gear-hunting-repeat' \
      -H 'Content-Type: application/json' \
      -d '{"driven_teeth":30,"driver_teeth":20}'
  • POST/machine-shrinkfit-contact-pressure$0.005Return elastic shrink-fit contact pressure and hub-bore hoop stress for a solid shaft and thick hub.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-shrinkfit-contact-pressure' \
      -H 'Content-Type: application/json' \
      -d '{"hub_nu":0.3,"hub_E_pa":200000000000,"shaft_nu":0.3,"shaft_E_pa":200000000000,"interference_m":0.00005,"shaft_diameter_m":0.05,"hub_outer_diameter_m":0.1}'
  • POST/machine-toggle-force-transfer$0.005Return ideal forces and geometry for a symmetric two-link toggle at a supplied angle.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-toggle-force-transfer' \
      -H 'Content-Type: application/json' \
      -d '{"link_length_m":1,"lateral_force_n":10,"angle_from_axis_deg":30}'
  • POST/machine-worm-backdrive-envelope$0.005Return ideal worm-drive friction angles, forward efficiency and backdrive margin.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/machine-worm-backdrive-envelope' \
      -H 'Content-Type: application/json' \
      -d '{"friction_mu":0.2,"lead_angle_deg":10}'
  • POST/mechanism-differential-drive-arc$0.005Integrate supplied left and right wheel travel into an exact constant-curvature planar pose increment.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/mechanism-differential-drive-arc' \
      -H 'Content-Type: application/json' \
      -d '{"x":0,"y":0,"track":0.5,"heading_rad":0,"left_distance":1,"right_distance":1}'
  • POST/mechanism-eccentric-cam-pressure-angle$0.005Return radial follower position and geometric pressure angle for a supplied eccentric circular cam.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/mechanism-eccentric-cam-pressure-angle' \
      -H 'Content-Type: application/json' \
      -d '{"angles_deg":[0,90,180],"disc_radius":10,"eccentricity":2}'
  • POST/mechanism-fourbar-circle-closures$0.005Return four-bar assembly poses, transmission angles and ideal output-to-input angular velocity ratios.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/mechanism-fourbar-circle-closures' \
      -H 'Content-Type: application/json' \
      -d '{"crank":1,"ground":4,"rocker":2,"coupler":3,"angle_deg":0}'
  • POST/mechanism-geneva-engagement-window$0.005Return ideal external Geneva-wheel engagement, angular position and speed ratio within a driver cycle.
    Example
    curl -i -X POST 'https://rechen.halowerk.com/v1/mechanism-geneva-engagement-window' \
      -H 'Content-Type: application/json' \
      -d '{"slots":4,"driver_angles_deg":[0,90]}'

A dash means the listing gives no price or method. {Braces} mark a value you fill in. Copy buttons copy an example URL.

Showing 25 of 31 endpoints. Next endpoints

Agents can find it through the Superstables MCP server and JSON API: GET /api/v1/services/rechen.halowerk.com

Recent checks

13 Nov 2026Taller is slower; grey is not live.17 Nov 2026
Median response
449 ms
Last checked
17 Nov, 18:23 UTC

Our probes look for a payment challenge. They don't test payment or delivery.

All 4 checks
When (UTC)ResultHTTPResponse
17 Nov, 18:23 UTCLive4021330ms
16 Nov, 03:24 UTCLive402355ms
14 Nov, 15:21 UTCLive402435ms
13 Nov, 00:24 UTCLive402462ms

Questions

Did our last probe detect a payment challenge?

At our last probe on 17 Nov, 18:23 UTC, it returned HTTP 402 or another detected payment-challenge signal.

What payment terms does rechen.halowerk.com advertise?

The listing advertises x402, Base and USDC. It names cdp as its facilitator. Check the seller's current payment challenge and authentication requirements before paying.

Something wrong on this page? Tell us.